|
|
6-DIGIT POSITION INDICATOR
The INFLDTA provides a five-key front panel, which can be used to select mode of operation, scale factor, zero offset and two setpoints for ON/OFF control or alarm. Setup parameters can be saved in non-volatile memory with four levels of front-panel lockout for program security. In addition, the P6000 can be programmed via RS-232. It can also report its own setup data and transmit ongoing readings and alarm status via RS-232 or 20 mA ASCII current loop. Modem support is built in for remote operation. The INFLDTA is a high accuracy indicator/controller for use with NewportÆs line of linear displacement transducers. A bright, readable display gives you quick and accurate measurement information. Three open collector outputs let you preset high, low and go setpoints so that you get the right measurement time after time. This highly accurate product is easily scaled in virtually any units of measure right from the front-panel. Hardware lockouts allow you to prevent unauthorized adjustment of the meter. A standard NEMA 4 (IP65) front bezel will stand up to tough industrial environments. The full 6-digit display lets you measure accurately down to 1/1000th of an inch! Leading Technology The linear displacement display (INFLDTA) launches a current pulse along a wire inside the LDT probe. When the magnetic field of the current pulse interacts with the magnetic field of the rare-earth magnet a torsional strain pulse is sent back to the INFLDTA. The lapsed time between the current pulse and the returning strain pulse is measured and scaled to read in engineering units (i.e., inches, millimeters, etc.). SPECIFICATIONS Accuracy at: 25░C Maximum Error: ▒0.001 inches Warmup to Rated Accuracy: 115 min. ENVIRONMENTAL Operating Temperature: 0 to 60░C (32 to 140░F) Storage Temperature: -40░C to 85░C (-40 to 184░F) Relative Humidity: 90% to 40░C (104░F) (non-condensing) POWER AC Voltage: 115 V or 230 V ▒10%, 48 to 440 Hz Consumption: 10 watts max. MECHANICAL Dimensions: 1.89" H x 3.78" W x 6.02" D (48 x 96 x 153 mm) Panel Cutout: 1.78 H x 3.62" W Weight: 1.27 lb. (574 g)
|
||||||||||||||||||||||||||||||||||||||||
HI and LO Setpoints for Control or Alarm
